Hi! I hope you are doing well. Today, my topic is all about sanding a floor. Here, you will get all the essential information regarding sanding a floor, including how long it takes to sand a floor.
I will tell you the general answer to it and then tell some essential factors that may affect it, so keep on reading if you are interested.
The Straight Forward Answer
If professionals sand the floor, it can take 1 to 5 days. On the other hand, if a DIYer does it, it can take 5-10 days, depending on the size of the floor. In easy words, one day of a professional is approximately equal to two days of a DIY enthusiast.
Factors that affect the period
Now, some factors can increase or decrease the given time. Let’s discuss them so that you have a crystal clear idea of how long does it take to sand a floor. Let’s have a look.
In the case of sanding a cupped floor, you might have to remove so much material for that perfect and smooth surface. If you leave these floors uneven, you might have to use a hand sander to take a lot of time. So, this factor might increase the period.
Previous Finish of the floor
The previous finish of the floor matters a lot. If you have a floor that was previously carpeted and is covered in carpet glue, then it will take you a lot longer to sand the floor. If your floor has been oiled, then that will also take time to get smooth. And if your floor has an aluminum oxide finish, it will be very hard for you to sand it, and it will take a lot of time. Aluminum oxide is very tough and abrasive, and it will take a lot of time to smooth it off.
Suppose you have a cupped floor that has an aluminum finish, then that will take the longest time. Make sure to ask for some professional’s help if you don’t have enough time or energy.
There are many ways in which a floor surface can be damaged. Damaged floors take a lot of time to sand. Your floor may have dents from dropping heavy objects onto it. You can have slight dents on your floor by stiletto heels or alike. Dents mean that you have to remove a great amount of wood from your floor. Your floor can be damaged through UV rays too. UV damage penetrates deep into the wood, which means that you need to remove more wood from the floor.
The floor could be grey because old floors can turn grey due to various reasons like water and air exposure. It will also increase the time of sanding the floor. These types of floors require deep sanding to get the perfect and smooth finish.
Type of wood
Most of the floors are made up of oak, and if yours is one of them, then I would like to tell you that they are very nice and easy to sand. There are some other types of wood that are very hard and abrasive. Woods like Jarrah or Rhodesian will take a lot of time. Another important thing that one should keep in mind is the age rule which suggests the older the wood, the harder it to sand. Even for a professional, sanding 100 years old wood would be a nightmare.
The number of rooms
The number of rooms affects the time very much. If there are many rooms then, they will take extra time to smooth the edges, which will again increase the total time to sand a floor.
Wrapping it up
I hope that every factor is clear now. If the floor is very rough, I will suggest you seek professional help as sanding the floor can be time taking and tough. I hope you enjoyed this article. Take care!